Vrworld reported recently that Intel recently gave an update on their 10nm process and the push to 7nm. According to Vrworld, Intel is expecting to move to 7nm architecture by 2018. What this effectively means is that Intel will move to a new material as Intel’s current silicon etching techniques will be sufficient to bring it to 10nm method. All I can think of is bring on the MHz and more cores 
Our technical marketing guru, Sofos, has put together an advanced overclocking guide based around uncore and memory overclocking using the GIGABYTE X99 SOC Champion motherboard and chipset so make sure you check this out if you are on X99 platform and need a few pointers. 1. Adjust the OC switch the position 2 , otherwise you won’t have the voltages you need for Uncore and memories. 2. Voltages for Uncore In the CPU Advanced Voltages, when you have the OC switch in the 2 position, you will see some extra voltages. VL1 to VL6. You only have to change VL4, VL5 and VL6 as below. The voltage you have to change to get higher uncore is mostly the VL6. Almost all the CPUs can do 1.45V, most of the CPUs can do 1.5V but some CPUs can do even higher Voltage. There are few CPUs that boot with lower than 1.45V though. If the CPU can do high VL6 then probably it can do and high Uncore but not all the times. It depends on the CPU. In the OS through GTL all you have to do is to raise the VRING to ...
Nhận xét
Đăng nhận xét